|
Tool
for marking off or light machining. It is equipped with a 200
diameter grooved faceplate in order to stirrup plates, if necessary.
The shaft has a 125 diameter spindle which is totally ground
and pre-arranged for any possible micrometric device. Clamping
is made by means of an eccentric pin. The nonius reading is
composed of a 360° graduated flange with a 10' reading counternonius,
both of them are chromium-plated.
Optional:
Art.
316: Device for micrometric rotation which can be easily
released in order to move the shaft quickly by hand; nonius
zero setting throught 2' indexing.
Art.
317: The 200 diameter grooved faceplate can be
supplied with an index plate having 72 positions (5°)
Art.
318: Center for the machining of shafts
|
Art.
315/316/317/318
Art.
318 
